Biogasoline25

Biogasoline100 is a drop-in fuels suitable for use in standard engines, and provide identical performance to existing petroleum fuels and use existing means of distribution.

LOW ENVIONMENTAL IMPACT. HIGH ENERGY. A major distinction of the biological motor fuels developed by Swedish Biofuels AB is their high energy content. This is achieved by using an original technology of biomass processing. In the Swedish Biofuels AB process, the synthesis parameters selected control the structure of the products producing liquid biological hydrocarbons identical to those of petroleum oil. The high energy content of the biological motor fuels of Swedish Biofuels AB allows them to be used as substitutes for petroleum motor fuels whilst showing identical fuel consumption.

In Depth

Test Property Unit Turbine fuels JetA1 Min Turbine fuels JetA1 Max Method
1 Appearance
1.1 Visual appearance clear and bright Visual
1.2 Colour Saybolt report ASTM D 156

ASTM D 6045

1.3 Particulate matter mg/l 1,0 IP 423

ASTM D 5452

2 Composition
2.1 Total Acidity mg KOH/g 0,015 IP 354

ASTM D 3242

Aromatic Hydrocarbon Types
Aromatics % v/v 25,0 IP 156

ASTM D 1319

Total Aromatics % v/v 26,0 IP 436

ASTM D 6379

Sulfur, total % m/m 0,30 IP 336
Sulfur, Mercaptan or % m/m 0,0030 IP 342
Doctor Test Negative IP 30
3 Volatility
3.1 Distillation IP 123

ASTM D86

3.1.1 Initial boiling point °C Report
3.1.2 10 percent recovered °C 205
3.1.3 50 percent recovered °C Report
3.1.4 90 percent recovered °C Report
3.1.5 End point °C 300
3.1.6 Residue % v/v 1,5
3.1.7 Loss % v/v 1,5
3.2 Flash point °C 38 4/ IP 170
3.3 Density (at 15° C) kg/l 0,775 0,84 IP 365

ASTM D 4052

4 Fluidity
4.1 Freezing point, °C °C -47 IP 16

ASTM D 2386

4.2 Viscosity (at -20°C) mm2

class=font6>/s

8 IP 71

ASTM D 445

5 Combustion
5.1 Smoke point mm 25 IP 57
5.2 Smoke point and mm 19 IP 57
Naphthalenes % v/v 3 ASTM D 1840
5.3 Specific energy MJ/kg 42,8
6 Corrosion
6.1 Copper strip corrosion, 2hr at 100°C (212°F) Class No.1 IP 154

ASTM D 130

7 Thermal stability, JFTOT IP 323

ASTM D 3241

7.1 Test temperature °C 260
7.2 Heater tube deposit, visual rating 3
7.3 Pressure differential mm Hg 25
8 Contaminants
8.1 Existent gum mg/100 ml 7 IP 540
9 Conductivity
Fuel electrical conductivity pS/m 50 600 IP 274

ASTM D 2624

10 Lubricity
10.1 Lubricity: Wear scar diameter mm 0,85 ASTM 5001